If Trouble Arises; Action to be taken; Warning/Indicator Lights and Warning Sounds- Page 615

Signal

Warning

Action to be taken

Seat Belt Warning

Light (Front seat)

Mexico

The seat belt warning light turns on if the
driver or front passenger's seat is occupied
and the seat belt is not fastened with the ig-
nition switched ON.
If the driver or front passenger's seat belt is
unfastened (only when the front passenger's
seat is occupied) and the vehicle is driven at
a speed faster than about 20 km/h (12 mph),
the warning light flashes. After a short time,
the warning light stops flashing, but re-
mains illuminated. If a seat belt remains un-
fastened, the warning light flashes again for
a given period of time.

NOTE



Placing heavy items on the front pas-
senger's seat may cause the front pas-
senger's seat belt warning function to op-
erate depending on the weight of the
item.



To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on
the front passenger's seat. The sensor
may not function properly because the
additional seat cushion could cause sen-
sor interference.



If a small child is seated on the front pas-
senger's seat, the warning light may not
operate.

Fasten the seat belts.

(Red)

Seat Belt Warning

Light (Rear seat)

*

If the rear seat belts are not fastened while
the ignition is switched ON , the driver and
the passenger are alerted by the warning
light.
The warning light operates even if there is
no passenger on the rear seat.

NOTE

If a rear seat belt is not fastened by a cer-
tain period of time after the engine has
been started, the warning light turns off.

Fasten the seat belts.

Low Washer Fluid

Level Warning Indica-

tion

*

This warning light indicates that little wash-
er fluid remains.

Add washer fluid (page 6-26).

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

7-39

CX-9_8HT8-EA-19I_Edition3_old

2020-1-8 11:19:15