Installing Child-Restraint Systems; Anchor Bracket; Essential Safety Equipment- Page 67

Installing Child-Restraint

Systems

Accident statistics reveal that a child is
safer in the rear seat. The front passenger's
seat is clearly the worst choice for any
child under 12, and with rear-facing
child-restraint systems it is clearly unsafe
due to air bags.
 

NOTE

Even if your vehicle is equipped with front
passenger occupant classification sensor
(page 2-84), which automatically
deactivates the front passenger air bag, a
rear seat is the safest place for a child of
any age or size.

 
Some child-restraint systems now come
with tethers and therefore must be
installed on the seats that take tethers to be
effective. In your Mazda, tethered
child-restraint systems can only be
accommodated in the four positions on the
rear seat.
 
Some child-restraint systems also employ
specially designed ISOFIX/LATCH

*1

attachments; refer to " (Mexico) Using
ISOFIX Lower Anchor (Second-Row
Seats)/(Except Mexico) Using LATCH
Lower Anchor (Second-Row Seats)" (page
2-64).

*

1 ISOFIX (Mexico)/LATCH (Except

Mexico)

WARNING

Tethered Child-Restraint Systems Work
Only on Tether-Equipped Rear Seats:

Installation of a tether equipped
child-restraint system in the front
passenger's seat defeats the safety design
of the system and will result in an increased
chance of serious injury if the
child-restraint system goes forward
without benefit of being tethered.
Place tether equipped child-restraint
systems where there are tether anchors.

▼

Anchor Bracket

Anchor brackets for securing
child-restraint systems are equipped in the
vehicle. Locate each anchor position using
the illustration.
To install a child-restraint system, remove
the head restraint (except third-row seat).

Essential Safety Equipment

Child Restraint

2-55

CX-9_8HT8-EA-19I_Edition3_old

2020-1-8 11:19:15