Replacing Interior Light Bulbs; Owner Maintenance; Overhead lights (Front)/Map lights- Page 573

the connector with your finger and
pulling the connector.
 

4. Turn the socket and bulb assembly

counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse

order of the removal procedure.

▼

Replacing Interior Light Bulbs

Overhead lights (Front)/Map lights
(Front) (LED type), Overhead lights
(Center)/Map lights (Center) (LED
type), Overhead lights (Rear) (LED
type), Vanity mirror lights (LED type),
Ambient lights

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.

The LED bulb has to be replaced with the
unit. If a replacement is necessary, consult
an Authorized Mazda Dealer.

Overhead lights (Front)/Map lights
(Front) (bulb type), Overhead lights
(Center)/Map lights (Center) (bulb
type), Overhead light (Rear) (bulb
type), Vanity mirror lights (bulb type)

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Overhead lights (Front)/Map lights
(Front)

Maintenance and Care

Owner Maintenance

6-43

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45