Appearance Care- Page 347

2008 Mazda MAZDA3 4-Door Mazda3 Owners Manual Built After Jan 1

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Mazda3_8Y64-EA-08A_Edition1.pdf
background image

Black plate (347,1)

CAUTION

Ø

Don't use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or
caustic agents on chrome-plated
or anodized aluminum parts. This
may damage the protective
coating; also, cleaners and
detergents may discolor or
deteriorate the paint.

Ø

To prevent damaging the antenna,
remove it before entering a car
wash facility or passing beneath a
low overhead clearance.

Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.

Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.

Thoroughly rinse off all soap with
lukewarm or cold water. Don't allow soap
to dry on the finish.

After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.

WARNING

Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal:

Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to one
side when braking could result in a
serious accident. Light braking will
indicate whether the brakes have
been affected.

Waxing

Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives.

Waxes containing abrasive will remove
paint and could damage bright metal
parts.

2. Use a good grade of natural wax for

metallic, mica, and solid colors.

3. When waxing, coat evenly with the

sponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, and similar
materials will usually also take off the wax.
Rewax these areas even if the rest of the
vehicle doesn't need it.

Maintenance and Care

Appearance Care

8-61

Mazda3_8Y64-EA-08A_Edition1 Page347
Tuesday, November 27 2007 9:2 AM

Form No.8Y64-EA-08A

Detailed Information for 2008 Mazda MAZDA3 4-Door Mazda3 Owners Manual Built After Jan 1

Lists of information found in 2008 Mazda MAZDA3 4-Door Mazda3 Owners Manual Built After Jan 1 - Page 347

  • 1. Use wax which contains no abrasives.
  • 2. Use a good grade of natural wax for metallic, mica, and solid colors.
  • 3. When waxing, coat evenly with the sponge supplied or a soft cloth.
  • 4. Wipe off the wax with a soft cloth.

Related Documents for 2008 Mazda MAZDA3 4-Door Mazda3 Owners Manual Built After Jan 1