Navigation System; PLANNING A ROUTE USING THE TOUCH-SCREEN; MAIN MENU- Page 28

27

Navigation System

PLANNING A ROUTE USING THE TOUCH-SCREEN

IMPORTANT:

 In the interest of safety and to reduce distractions while you 

are driving, you should always plan a route before you start driving.

To plan a route on your Navigation system, do the following:
 

1

        Push the NAV button to access the Navigation System.

2

        Tap the screen (above) to open the 

MAIN MENU

 (below).

   NOTE:

Factory Navigation System 

is available if the vehicle is equipped 
with the 5.8” LCD screen. Contact your 
Authorized Mazda Dealer for more details.

3

     Touch 

Navigate to

.

4

        Touch 

Address

. 

Navigation System

TO REMOVE OR INSERT THE MAP SD CARD:

  1     

Turn the vehicle ignition OFF.

2

     The Navi SD card is located in the  

center console.

3

     Locate the sliding door (left) and slide it open (right).

•      Remove  card: Push the card once, then pull it out.

•      Insert card: Push the card in (label-side up), then slide door closed (left). 

NOTE: 

• 

 Visit www.mazdausa.com/navigation within 60 days of vehicle delivery 
and download the most recent map available for your device for free. In 
order to download or upgrade your map, the TomTom Home software must 
be downloaded. Please refer to the Navigation System Owners Manual 
section of www.mazdausa.com/navigation for additional information.

• 

 Only use your MAP SD card for operating and updating your navigation system. Do not 
insert the MAP SD card into another vehicle or into any other device such as a camera.

• 

 If your vehicle is not equipped with a factory navigation system, your audio system  
can be upgraded to include navigation. Contact your Authorized Mazda Dealer for 
more details.

SD Card