29
Bluetooth
®
PAIRING YOUR BLUETOOTH
®
PHONE OR AUDIO DEVICE
• For safety reasons, you cannot pair a phone while driving.
• Before pairing your cell phone or audio device, it is recommended that you refer to its
manual for steps to turn on Bluetooth
®
and perform pairing.
•
For customer service and device compatibility:
Toll-free call: 800-430-0153
Website: www.MazdaUSA.com/bluetooth
•
IMPORTANT:
Set the volume level on your cell phone or audio device to the highest level
before distortion starts, then adjust the volume on the audio system.
• When in range of another Wi-Fi device, the Bluetooth connection between your phone and
the system may disconnect for a short time if you have Wi-Fi enabled. Turn off Wi-Fi on your
phone if needed.
To Make Or Receive A Hands-Free Call
Basic Operation:
button:
To make/receive/swap a call.
button:
To end/reject a call.
button:
To skip vehicle voice guidance and allow
user to speak next voice command.
NOTE:
For connection issues, please confirm the Bluetooth connection status by pushing
the PHONE button and looking in the top left corner for the Bluetooth icon and your phone’s
name. Some phones will turn off the Bluetooth signal after connecting the USB cable to
the vehicle or after downloading an update.
• If not displayed, check your phone and make sure Bluetooth is turned on (or discoverable)
in the Settings menu. Detailed instructions for some phones are available online.
• If there is still no connection, delete the pairing data on the system and your phone and
try again after confirming your cell phone is compatible at www.MazdaUSA.com/bluetooth.
Automatic Bluetooth
Reconnection:
On engine start, the last
connected device will
automatically be re-connected
after several seconds. To
switch phones, go to
BLUETOOTH SETUP.
NOTE:
Some phone models do not support all features. Go to www.MazdaUSA.com/bluetooth
or contact (800) 430-0153 for further assistance or to report a phone /MP3 device concern.
Voice Pairing
1
Manually turn Bluetooth on
your phone or audio device.
2
Push and release the
button on the steering
wheel (wait for beep).
3
From main menu,
say, “Setup,”
then “Pairing Options.”
4
Say, “Pair.”
5
Say a four-digit code
(i.e., “1, 2, 3, 4”).
6
Place phone in discovery
mode; if necessary, consult
your phone’s manual or go
to www.mazdausa.com/
bluetooth. Select model,
Bluetooth, and follow
screen prompts.
7
After phone is recognized,
you will be prompted to
name the paired phone.
8
Pairing completed.
Panel Operation
(with Navigation)
1
Manually turn Bluetooth on
your phone or audio device.
2
Push the PHONE button
3
Touch the
Setup
on-screen button.
4
Touch the
Bluetooth Setup
on-screen button. The
list of pairing devices is
displayed.
5
Touch the
Add New Device
on-screen button to display
the message and switch to
the device operation.
6
Using the device, perform
a search for the Bluetooth
®
device (Peripheral device).
7
Select “Mazda” from the
device list searched by
the device.
8
(Device with Bluetooth
®
version 2.0)
Input the displayed
4-digit pairing code
into the device.
(Device with Bluetooth
®
version 2.1 or higher)
•
Just Works is detected
The pairing is performed
automatically.
•
Numeric Comparison
is detected
Verify the displayed 6-digit
code on the audio unit
is also displayed on the
device, and touch the
Yes
on-screen button and
then “YES” on the device
if needed.
9
(Call History)
Incoming/Outgoing
history for the device is
downloaded automatically.