Owner Maintenance; Maintenance and Care; lights (LED type), Taillights (Trunk lid - Page 448

2014 Mazda MAZDA3 4-Door Owners Manual Vin Strating With Jm1

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

4. When Driving
8. Customer Information and Reporting Safety Defects
background image

*

Some models.

6–50

Maintenance and Care

Owner Maintenance

   5.   Disconnect the connector from the unit 

by pressing the tab on the connector 
with your fi nger and pulling the 
connector downward.

   6.   Turn the socket and bulb assembly 

to remove it. Carefully remove the 
bulb from its socket in the refl ector by 
gently pulling it straight backward out 
of the socket.

   7.   Install the new bulb in the reverse order 

of the removal procedure.

  Side turn signal lights 

*

 , Brake lights 

(LED type), Taillights/Rear side-marker 
lights (LED type), Taillights (Trunk lid 
side/Liftgate side), High-mount brake 
light

    Due to the complexity and diffi culty of 
the procedure, the LED bulbs must be 
replaced by an Authorized Mazda Dealer.

   NOTE

  LED bulb replacement is not possible 
because it is built into the unit. Replace 
the unit.

  Rear turn signal lights, Brake lights/
Taillights/Rear side-marker lights (Bulb 
type)

    4–Door

     1.   Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

   2.   Pull the center of each plastic retainer 

and remove the retainers.

   3.   Remove  trunk  end  trim.

Installation

Removal

   4.   Pull the center of each plastic retainer 

and remove the retainers.

/C\FCA&('#*A'FKVKQPKPFD

/C\FCA&('#*A'FKVKQPKPFD

Detailed Information for 2014 Mazda MAZDA3 4-Door Owners Manual Vin Strating With Jm1

Lists of information found in 2014 Mazda MAZDA3 4-Door Owners Manual Vin Strating With Jm1 - Page 448

  • 5. Disconnect the connector from the unit by pressing the tab on the connector with your fi nger and pulling the connector downward.
  • 6. Turn the socket and bulb assembly to remove it.
  • 7. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off, and the headlight switch is off.
  • 2. Pull the center of each plastic retainer and remove the retainers.
  • 3. Remove trunk end trim.
  • 4. Pull the center of each plastic retainer and remove the retainers.

Related Documents for 2014 Mazda MAZDA3 4-Door Owners Manual Vin Strating With Jm1