Before Driving; Doors and Locks- Page 92

3–18

Before Driving

Doors and Locks

 Function 

number 

 Function 

*1

 1 

 The auto door-lock function is 
disabled.

 2 

 All the doors and the liftgate/trunk lid 
lock automatically when the vehicle 
speed is about 20 km/h (12 mph) or 
more.

 3 

 All the doors and the liftgate/trunk lid 
lock automatically when the vehicle 
speed is about 20 km/h (12 mph) or 
more. All the doors and theliftgate/
trunk lid unlock when the ignition is 
switched from ON to Off. 

 4 

(Automatic transaxle vehicles only)

  When the ignition is switched ON 
and the shift lever is shifted from park 
(P) to any other gear position, all the 
doors and the liftgate/trunk lid lock 
automatically. 

 5 

(Automatic transaxle vehicles only)

  When the ignition is switched ON 
and the shift lever is shifted from park 
(P) to any other gear position, all the 
doors and the liftgate/trunk lid lock 
automatically.
  When the shift lever is shifted to park 
(P) while the ignition is switched ON, 
all the doorsliftgate/trunk lid unlock 
automatically. 

     *1   Other settings for the auto door lock function are 

available at an Authorized Mazda Dealer. For 
details consult an Authorized Mazda Dealer. Refer 
to Personalization Features on page  9-12 .

  Settings can be changed using the 
following procedure.

   1.   Safely park the vehicle. All doors must 

remain closed.

   2.   Switch  the  ignition  ON.
   3.   Press and hold the lock side of the 

driver's door-lock switch within 20 
seconds of switching the ignition ON, 
and make sure a beep sound is heard 
about eight seconds afterwards.

   4.   Refer to the auto lock/unlock function 

setting table, determine the function 
number for the desired setting. Press 
the unlock side of the driver's door-lock 
switch the same number of times as the 
selected function number (Ex. If you 
select function 2, press the unlock side 
of the switch only 2 times).

   5.   Three seconds after the function setting 

has been changed, a beep sound will 
beep in the amount of the selected 
function number. (Ex. Function number 
3 = 3 beep sounds)

(Manual transaxle vehicles)

Press 2 times

Press 3 times

Current Function Number

Function Number 1

Function Number 2

Function Number 3

Press 4 times

Press unlock side of 
lock switch once

Cancel setting

Cancel setting

Function set (The 
number of beeps 
heard is the same as 
the selected function 
number)

Press lock side of
lock switch

Wait for 3 second

/C\FCA&('#*A'FKVKQPKPFD

/C\FCA&('#*A'FKVKQPKPFD