Dynamic Stability Control ; Headlight High Beams On; Pretensioner System - Page 38

37

TACHOMETER

Instrument Cluster (Type B)

Traction Control System (TCS)/

Dynamic Stability Control (DSC)

On: TCS/DSC malfunction  
Flashing: TCS/DSC operating

BSM

OFF

BSM OFF (Blind Spot 

Monitoring)

(p. 21)

OFF

Dynamic Stability Control  

(DSC) Off Indicator Light

SPORT Mode On

(p. 39)

Lights On (Exterior)

 High Beam Control On 
 

Headlight High Beams On

Air Bag/Front Seat Belt 

Pretensioner System 

Malfunction

Check Engine Light

Seat Belt Unbuckled/

Malfunction

Turn Signals/Hazard  

Warning Indicator Lights

Tire Pressure Monitoring System 

(TPMS) Warning Light

 (p. 7)

On/Warning Beep: Low tire pressure in one 
or more tires. Flashing: TPMS Malfunction

Cruise Main Indicator Light  

On (

AMBER

)/Cruise Set 

Indicator Light On (

GREEN

)

ABS (Antilock Brake  

System) Malfunction

Shift Position Indicator Light

Security Indicator Light

Brake Warning Light

Parking brake on/low brake  
fluid/malfunction

TPMS NOTE:

Low ambient temperature and/or high altitude may cause tire pressures to 

change and turn the TPMS warning light on. If the warning light comes on, see p. 7.

OUTSIDE  

TEMPERATURE DISPLAY

The outside temperature unit can be 

switched between °C and °F using the 

following procedure
Without Infotainment:

 1

   Push the INFO button with the 

ignition OFF and continue pressing 

the INFO button for 5 seconds or 

longer after switching the ignition 

ON. The outside temperature 

display flashes. 

 2

   Push the up or down part of 

the INFO switch to change the 

temperature unit.

 3

   Push and hold the INFO button for 

3 seconds or longer until it stops 

flashing.

With Infotainment:

 1

   Go to System Settings.

IMPORTANT:

When your Mazda Connect display setting is set on 

“AUTO”, the instrument cluster and display may become dimmer when 

the headlights are on. If the display and instrument cluster become too 

dim or too bright when the headlights are on, simply rotate the dimmer 

knob located on your instrument cluster to adjust the brightness.