Dynamic Stability Control (DSC); When Driving; Control as a substitute for safe driving:- Page 206

4–80

When Driving

ABS/TCS/DSC

 Dynamic  Stability 
Control (DSC)

            The  Dynamic  Stability  Control  (DSC) 
automatically controls braking and engine 
torque in conjunction with systems such 
as ABS and TCS to help control side slip 
when driving on slippery surfaces, or 
during sudden or evasive maneuvering, 
enhancing vehicle safety.

  Refer to ABS (page  4-78 ) and TCS (page 
 4-79 ).

  DSC operation is possible at speeds 
greater than 20 km/h (12 mph).

  The warning light turns on when the 
system has a malfunction.
  Refer to Warning Lights on page  4-21 .

WARNING

  Do not rely on the Dynamic Stability 
Control as a substitute for safe driving:

  The Dynamic Stability Control (DSC) 
cannot compensate for unsafe and 
reckless driving, excessive speed, 
tailgating (following another vehicle 
too closely), and hydroplaning 
(reduced tire friction and road contact 
because of water on the road surface). 
You can still have an accident.

CAUTION

¾

  The DSC may not operate correctly 

unless the following are observed:

¾

  Use tires of the correct size specifi ed 

for your Mazda on all four wheels.

¾

  Use tires of the same manufacturer, 

brand and tread pattern on all four 
wheels.

¾

  Do not mix worn tires.

¾

  The DSC may not operate correctly when 

tire chains are used or a temporary spare 
tire is installed because the tire diameter 
changes.

 TCS/DSC Indicator Light

  This indicator light stays on for a few 
seconds when the ignition is switched 
ON. If the TCS or DSC is operating, the 
indicator light fl ashes.

  If the light stays on, the TCS, DSC 
or the brake assist system may have a 
malfunction and they may not operate 
correctly. Take your vehicle to an 
Authorized Mazda Dealer.