Owner Maintenance; Maintenance and Care; Rear turn signal lights- Page 454

6–54

Maintenance and Care

Owner Maintenance

3.     Turn the wing bolt and jack screw 

counterclockwise.

4.     Remove  the  jack
5.     Turn the socket and bulb assembly 

counterclockwise and remove it.

6.     Disconnect the bulb from the socket.
   

Rear turn signal lights

Brake lights/Taillights/Rear side-
marker lights (Bulb type)

7.      Install  the  new  bulb.
8.      Insert the wing bolt into the jack with 

the jack screw pointing to the down 
and turn the wing bolt clockwise to 
temporarily tighten it.

9.      Turn the jack screw in the direction 

shown in the fi gure.

10.     Turn the wing bolt completely to secure 

the jack.

   NOTE

  If the jack is not completely secured, it 
could rattle while driving. Make sure the 
jack screw is suffi ciently tightened.