Dynamic Stability Control(DSC); When Driving; Dynamic Stability - Page 192

4–64

When Driving

ABS/TCS/DSC

Dynamic Stability 

Control (DSC)

The Dynamic Stability Control (DSC) 

automatically controls braking and engine 

torque in conjunction with systems such 

as ABS and TCS to help control side slip 

when driving on slippery surfaces, or 

during sudden or evasive maneuvering, 

enhancing vehicle safety.

Refer to ABS (page 

4-62) and TCS 

(page 4-63).

DSC operation is possible at speeds 

greater than 20 km/h (12 mph).

The warning light turns on when the 

system has a malfunction.

Refer to Warning Lights on page 

4-21.

WARNING

Do not rely on the Dynamic Stability 

Control as a substitute for safe driving:

The Dynamic Stability Control (DSC) 

cannot compensate for unsafe and 

reckless driving, excessive speed, 

tailgating (following another vehicle 

too closely), and hydroplaning 

(reduced tire friction and road contact 

because of water on the road surface). 

You can still have an accident.

CAUTION



  The DSC may not operate correctly 

unless the following are observed:



  Use tires of the correct size specified 

for your Mazda on all four wheels.



  Use tires of the same manufacturer, 

brand and tread pattern on all four 

wheels.



  Do not mix worn tires.



  The DSC may not operate correctly when 

tire chains are used or a temporary spare 

tire is installed because the tire diameter 

changes.

 TCS/DSC Indicator Light

This indicator light stays on for a few 

seconds when the ignition is switched 

ON. If the TCS or DSC is operating, the 

indicator light flashes.

If the light stays on, the TCS, DSC 

or the brake assist system may have a 

malfunction and they may not operate 

correctly. Take your vehicle to an 

Authorized Mazda Dealer.

Mazda3_8FA4-EA-15G_Edition1.indb   64

2015/05/11   14:00:56