Owner Maintenance; Maintenance and Care- Page 464

6–60

Maintenance and Care

Owner Maintenance

4.  Disconnect the connector from the unit 

by pressing the tab on the connector 

with your finger and pulling the 

connector.

5.  Turn the socket and bulb assembly 

counterclockwise and remove it.

6.  Disconnect the bulb from the socket.

7.  Install the new bulb in the reverse order 

of the removal procedure.

5–Door

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Wrap a flathead screwdriver with a soft 

cloth to prevent damage to the lens, 

and then remove the lens by carefully 

prying on the edge of the lens with a 

flathead screwdriver.

3.  Disconnect the bulb by pulling it out.

4.  Install the new bulb in the reverse order 

of the removal procedure.

Mazda3_8FA4-EA-15G_Edition1.indb   60

2015/05/11   14:02:28