Start/Stop Engine; Ignition Switch; When Driving- Page 134

4–4

When Driving

Start/Stop Engine

Ignition Switch

 Push Button Start Positions

The system operates only when the key is 

within operational range.

Each time the push button start is pressed, 

the ignition switches in the order of off, 

ACC, and ON. Pressing the push button 

start again from ON switches the ignition 

off.

Indicator light

Push button start

NOTE



  The engine starts by pressing the push 

button start while depressing the clutch 

pedal (manual transaxle) or the brake 

pedal (automatic transaxle). To switch 

the ignition position, press the push 

button start without depressing the 

pedal.



  Do not leave the ignition switched ON 

while the engine is not running. Doing 

so could result in the battery going 

dead. If the ignition is left in ACC (For 

automatic transaxle, the selector lever 

is in the P position, and the ignition 

is in ACC), the ignition switches off 

automatically after about 25 minutes.

Off

The power supply to electrical devices 

turns off and the push button start indicator 

light (amber) also turns off.

WARNING

Before leaving the driver's seat, always 

switch the ignition off, set the parking 

brake, and make sure the selector lever 

is in P (automatic transaxle) or in 1st 

gear or R (manual transaxle):

Leaving the driver's seat without 

switching the ignition off, setting the 

parking brake, and shifting the selector 

lever to P (automatic transaxle) or 

to 1st gear or R (manual transaxle) 

is dangerous. Unexpected vehicle 

movement could occur which could 

result in an accident.

In addition, if your intention is to leave 

the vehicle for even a short period, it 

is important to switch the ignition off, 

as leaving it in another position will 

disable some of the vehicle's security 

systems and run the battery down.

Mazda3_8FL6-EA-16F_Edition2.indb   4

2016/08/10   17:35:41