Owner Maintenance; Maintenance and Care; High-beam bulbs/Daytime running - Page 460

6–48

Maintenance and Care

Owner Maintenance

High-beam bulbs/Daytime running 

lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Lift the hood.

3.  Disconnect the connector from the unit 

by pressing the tab on the connector 

with your finger and pulling the 

connector downward.

4.  Turn the socket and bulb assembly 

to remove it. Carefully remove the 

bulb from its socket in the reflector by 

gently pulling it straight backward out 

of the socket.

5.  Install the new bulb in the reverse order 

of the removal procedure.

Front turn signal lights, Parking lights/

Front side-marker lights (With halogen 

headlights), Front side-marker lights 

(With LED headlights)

1.  If you are changing the right bulb, start 

the engine, turn the steering wheel all 

the way to the left, and turn off engine. 

If you are changing the left bulb, turn 

the steering wheel to the right, and turn 

off engine.

2.  Make sure the headlight switch is off.

3.  Pull the center of each plastic retainer 

and remove the retainers.

Removal

Installation

Mazda3_8FL6-EA-16F_Edition2.indb   48

2016/08/10   17:38:51