Owner Maintenance; Maintenance and Care; License plate lights- Page 469

6–57

Maintenance and Care

Owner Maintenance

5.  Disconnect the bulb from the socket.

6.  Install the new bulb in the reverse order 

of the removal procedure.

License plate lights

4–Door

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Pull the center of each plastic retainer 

and remove the retainers.

3.  Peel back the trunk lid trim.

Removal

Installation

4.  Disconnect the connector from the unit 

by pressing the tab on the connector 

with your finger and pulling the 

connector.

5.  Turn the socket and bulb assembly 

counterclockwise and remove it.

6.  Disconnect the bulb from the socket.

7.  Install the new bulb in the reverse order 

of the removal procedure.

Mazda3_8FL6-EA-16F_Edition2.indb   57

2016/08/10   17:38:58