Before Driving; Doors and Locks; Driver's door request switch- Page 91

3–15

Before Driving

Doors and Locks

To unlock

Driver's door request switch

To unlock the driver's door, press the 

request switch. A beep sound will be heard 

twice and the hazard warning lights will 

flash twice.

To unlock all doors and the liftgate/trunk 

lid, press the request switch again within 

3 seconds and two more beep sounds will 

be heard.

Front passenger door request switch

To unlock all doors and the liftgate/trunk 

lid, press the request switch. A beep sound 

will be heard twice and the hazard warning 

lights will flash twice.

NOTE



  The system can be set to unlock all 

doors by performing a single operation.

  Refer to Personalization Features on 

page 9-12.

  Use the following procedure to change 

the setting.

1.  Switch the ignition off and close all 

of the doors and the liftgate/trunk 

lid.

2.  Open the driver's door.

3.  Within 30 seconds of opening the 

driver's door, press and hold the 

UNLOCK button on the key for 5 

seconds or longer (the sound of 

the doors locking/unlocking can be 

heard).

  After this, the system switches the 

setting of pressing the driver's 

request switch once or twice to 

unlock all doors and the liftgate/

trunk lid each time the UNLOCK 

button is pressed (the sound of the 

doors locking/unlocking can be 

heard).

4.  The setting change is completed by 

doing any one of the following:



  Switching the ignition to ACC or 

ON.



  Closing the driver's door.



  Opening the liftgate/trunk lid.



  Not operating the key for 10 

seconds.



  Pressing any button except the 

UNLOCK button on the key.



  Pressing a request switch.



  Confirm that all doors and the liftgate/

trunk lid are securely locked.

  For the liftgate/trunk lid, move it 

without pressing the electric liftgate/

trunk lid opener to verify that the 

liftgate/trunk lid has not been left ajar.

Mazda3_8FL6-EA-16F_Edition2.indb   15

2016/08/10   17:35:20