Before Driving; Function ; Doors and Locks- Page 95

3–19

Before Driving

Doors and Locks

Function 

number

Function

*1

5

(Automatic transaxle vehicles only)

When the ignition is switched ON 

and the shift lever is shifted from park 

(P) to any other gear position, all the 

doors and the liftgate/trunk lid lock 

automatically.

When the shift lever is shifted to park 

(P) while the ignition is switched ON, 

all the doors and the liftgate/trunk lid 

unlock automatically.

*1  Other settings for the auto door lock function are 

available at an Authorized Mazda Dealer. For 

details consult an Authorized Mazda Dealer. Refer 

to Personalization Features on page 9-12.

Settings can be changed using the 

following procedure.
1.  Safely park the vehicle. All doors must 

remain closed.

2.  Switch the ignition ON.

3.  Press and hold the lock side of the 

driver's door-lock switch within 20 

seconds of switching the ignition ON, 

and make sure a beep sound is heard 

about eight seconds afterwards.

4.  Refer to the auto lock/unlock function 

setting table, determine the function 

number for the desired setting. Press 

the unlock side of the driver's door-lock 

switch the same number of times as the 

selected function number (Ex. If you 

select function 2, press the unlock side 

of the switch only 2 times).

5.  Three seconds after the function setting 

has been changed, a beep sound will 

beep in the amount of the selected 

function number. (Ex. Function number 

3 = 3 beep sounds)

(Manual transaxle vehicles)

Press 2 times

Press 3 times

Current Function Number

Function Number 1

Function Number 2

Function Number 3

Press 4 times

Press unlock side of 

lock switch once

Cancel setting

Cancel setting

Function set (The 

number of beeps 

heard is the same as 

the selected function 

number) 

Press lock side of  

lock switch

Wait for 3 second

(Automatic transaxle vehicles)

Press unlock side of 

lock switch once

Press 2 times

Press 3 times

Current Function Number

Function Number 1

Function Number 2

Press 4 times

Function Number 3

Press 5 times

Function Number 4

Press 6 times

Function Number 5

Cancel setting

Cancel setting

Function set (The 

number of beeps 

heard is the same as 

the selected function 

number) 

Press lock side of  

lock switch

Wait for 3 second

Mazda3_8FL6-EA-16F_Edition2.indb   19

2016/08/10   17:35:22