When Driving- Page 141

2.

(Manual transaxle)

Continue to depress the clutch pedal
firmly until the engine has completely
started.

3. Verify that the push button start

indication light (green) flashes.

4. Touch the push button start using the

backside of the key (as shown) while
the push button start indicator light
(green) flashes.
 

Pu

sh b

u

tton start

Transmitter

Indicator li

g

ht

NOTE

When touching the push button start
using the backside of the key as shown
in the illustration, touch the push
button start with the lock switch side of
the key facing up.

5. Verify that the push button start

indicator light (green) turns on.

6. Press the push button start to start the

engine.

NOTE



The engine cannot be started unless
the clutch pedal is fully depressed
(manual transaxle) or the brake
pedal is fully depressed (automatic
transaxle).



If there is a malfunction with the
push button start function, the push
button start indicator light (amber)
flashes. In this case, the engine may
start, however, have the vehicle
checked at an Authorized Mazda
Dealer as soon as possible.



If the push button start indicator
light (green) does not illuminate,
perform the operation from the
beginning again. If it does not
illuminate, have the vehicle checked
at an Authorized Mazda Dealer.



To switch the ignition position
without starting the engine, perform
the following operations after the
push button start indicator light
(green) turns on.
1. Release the clutch pedal (manual

transaxle) or brake pedal
(automatic transaxle).

2. Press the push button start to

switch the ignition position. The
ignition switches in the order of
ACC, ON, and off each time the
push button start is pressed. To
switch the ignition position
again, perform the operation
from the beginning.

When Driving

Start/Stop Engine

4-9

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21