Type C; When Driving; Instrument Cluster and Display- Page 146

Type C

Selector

Press the selector

Press the selector

Press the selector

Odometer

Trip meter A

Trip meter B

NOTE

When the ignition is switched to ACC or
off, the odometer or trip meters cannot be
displayed, however, pressing the selector
can inadvertently switch the trip meters or
reset them during an approximate
ten-minute period in the following cases:



After the ignition is switched to off from
ON.



After the driver's door is opened.

Odometer

The odometer records the total distance
the vehicle has been driven.

Trip meter

The trip meter can record the total distance
of two trips. One is recorded in trip meter
A, and the other is recorded in trip meter
B.
 
For instance, trip meter A can record the
distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
 
When trip meter A is selected, pressing the
selector again within one second will
change to trip meter B mode.
 
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
 
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to “0.0” by
depressing and holding the selector for one
second or more. Use this meter to measure
trip distances and to compute fuel
consumption.

NOTE



(Vehicles with type B audio)

If the fuel economy data is reset using
the fuel economy monitor, or trip A is
reset using the trip meter when the
function which synchronizes the fuel
economy monitor and the trip meter is
on, the fuel economy data and trip A are
reset simultaneously.
Refer to Fuel Economy Monitor on page
4-72.



Only the trip meters record tenths of
kilometers (miles).

When Driving

Instrument Cluster and Display

4-14

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21