Manually Shifting Up; When Driving; Automatic Transaxle- Page 168

NOTE



If the gears cannot be shifted down
when driving at higher speeds, the gear
position indication will flash twice to
signal that the gears cannot be shifted
down (to protect the transaxle).



If the automatic transaxle fluid (ATF)
temperature becomes too high, there is
the possibility that the transaxle will
switch to automatic shift mode,
canceling manual shift mode and
turning off the gear position indication
illumination. This is a normal function
to protect the AT. After the ATF
temperature has decreased, the gear
position indication illumination turns
back on and driving in manual shift
mode is restored.

▼

Manually Shifting Up

You can shift gears up by operating the
selector lever or the steering shift
switches

*

.

M1 → M2 → M3 → M4 → M5 → M6

Using selector lever

To shift up to a higher gear, tap the
selector lever back   once.
 

Using steering shift switch

*

To shift up to a higher gear with the
steering shift switches, pull the UP switch
(

) toward you once with your

fingers.
 

UP switch

WARNING

Keep your hands on the steering wheel rim
when using fingers on the steering shift
switches:

Putting your hands inside the rim of the
steering wheel when using the steering
shift switches is dangerous. If the driver's air
bag were to deploy in a collision, your
hands could be impacted causing injury.

When Driving

Automatic Transaxle

4-36

*Some models.

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21