Mazda Dealer.- Page 311

2008 Mazda MAZDA3 5-Door Mazda3 Owners Manual Built Before Jan 1

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Mazda3_8X41-EA-07F_Edition2.pdf
background image

Black plate (311,1)

Replacing a fog light bulbs

í

1. Turn the screw counterclockwise and

remove it and then partially peel back
the mudguard.

2. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.

3. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight back out of the
socket.

4. Install the new bulb in the reverse order

of removal.

NOTE

l

To replace the bulb, contact an Authorized
Mazda Dealer.

l

If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.

l

Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.

Front turn signal lights/Side-marker
lights

Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.

Side turn signal lights

1. Slide the unit as shown in the figure to

remove it.

2. Detach the electrical connector from

the unit by pulling it to the rear.

3. Install the new side turn signal unit in

the reverse order of removal.

NOTE

Bulb replacement is not possible because it is
built into the unit. Replace the unit.

Maintenance and Care

Owner Maintenance

8-43

í

Some models.

Mazda3_8X41-EA-07F_Edition2 Page311
Monday, June 18 2007 1:30 PM

Form No.8X41-EA-07F

Detailed Information for 2008 Mazda MAZDA3 5-Door Mazda3 Owners Manual Built Before Jan 1

Lists of information found in 2008 Mazda MAZDA3 5-Door Mazda3 Owners Manual Built Before Jan 1 - Page 311

  • 1. Turn the screw counterclockwise and remove it and then partially peel back the mudguard.
  • 2. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward.
  • 3. Turn the socket and bulb assembly to remove it.
  • 4. Install the new bulb in the reverse order of removal.
  • 1. Slide the unit as shown in the figure to remove it.
  • 2. Detach the electrical connector from the unit by pulling it to the rear.
  • 3. Install the new side turn signal unit in the reverse order of removal.

Related Documents for 2008 Mazda MAZDA3 5-Door Mazda3 Owners Manual Built Before Jan 1