Owner Maintenance; Maintenance and Care- Page 456

6–56

Maintenance and Care

Owner Maintenance

  5–Door

     1.   Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

   2.   Remove  the  cover.

   3.   Disconnect  the  electrical  connector 

from the bulb by pressing the tab on the 
connector with your fi nger and pulling 
the connector.

   4.   Turn the socket and bulb assembly 

counterclockwise and remove it.

   5.   Disconnect the bulb from the socket.

   6.   Install the new bulb in the reverse order 

of the removal procedure.

  License  plate  lights

    4–Door

     1.   Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

   2.   Pull the center of each plastic retainer 

and remove the retainers.

   3.   Peel back the trunk lid trim.

Removal

Installation

   4.   Turn the socket and bulb assembly 

counterclockwise and remove it.