Brightness Control:; Active Driving Display:; The Active Driving Display displays the following information:- Page 16

15

The Active Driving Display displays the following information:

• 

 Vehicle Speed Setting

using cruise control 

• 

 Navigation Turn-by-Turn 

(TBT)

 direction, distance 

and lane guidance 

• 

 Lane Departure Warning 

System (LDWS)

 operation 

conditions and warnings

• 

 Smart City Brake  

Support (SCBS)

warnings

• 

 Vehicle Speed Setting

using cruise control

(if equipped)

To change the settings/adjustments for the Active Driving Display:

 1

  Select the Settings icon on the 

Home screen.

 2

  Select the AD-Disp tab.

 3

  Select the desired item to change.

• 

 Height:

 Adjust the position of the 

virtual image of the Active Driving 

Display up or down.

 •  

Brightness Control:

 Method 

for adjusting screen brightness 

(Automatically with instrument 

cluster illumination or manually).

 • 

 Calibration:

 Brightness 

initialization setting (when 

selecting automatic adjustment).

 •  

Brightness:

 Brightness 

adjustment (when selecting 

manual adjustment).

 • 

 Navigation:

 On/Off.

 •  

Active Driving Display:

On/Off.

 • 

 Reset: 

Reset to  

default settings.

50

 mph

0

MPH

Active Driving Display

NOTE:

• 

 If the display does not operate, switch the ignition off and then switch it back on. If it 

still does not operate even with the ignition switched ON, have the vehicle inspected at 

an Authorized Mazda Dealer.

• 

 It may be difficult to view the display when wearing sunglasses. Take off your 

sunglasses or adjust the luminosity.

• 

 If the battery has been removed and re-installed or the battery voltage is low, the 

adjusted position may deviate.

• 

 The display may be difficult to view or temporarily affected by weather conditions such 

as rain, snow, light, and temperature.

ACTIVE DRIVING DISPLAY (if equipped)

CAUTION:

 Always adjust the display 

using the Settings screen (AD-Disp 

tab). Do not try to adjust the angle 

or open/close the display by hand. 

Fingerprints on the display will 

make it difficult to view and manual 

operation could cause damage.