Active Driving Display*; When Driving; Active Driving Display- Page 151

4–21

When Driving

Instrument Cluster and Display

*Some models.

Active Driving Display

*

Optical receiver

Mirror

Combiner

WARNING

Always adjust the display brightness and position with the vehicle stopped:

Adjusting the display brightness and position while driving the vehicle is dangerous as 

doing so could distract your attention from the road ahead and lead to an accident.

CAUTION



  Do not try to adjust the angle or open/close the active driving display manually. 

Fingerprints on the display will make it difficult to view and using excessive force when 

operating it could cause damage.



  Do not place objects in the vicinity of the active driving display. The active driving display 

may not operate or any interference with its operation could cause damage.



  Do not place beverages near the active driving display. If water or other liquids are splashed 

on the active driving display, it could cause damage.



  Do not place objects above the active driving display or apply stickers to the dust-proof 

sheet/optical receiver as they will cause interference.



  A sensor is integrated to control the display's luminosity. If the optical receiver is covered, 

the display's luminosity will lower making the display difficult to view.



  Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

NOTE



  It may be difficult to view the display when wearing polarized sunglasses. Take off your 

polarized sunglasses or adjust the luminosity.



  If the battery has been removed and re-installed or the battery voltage is low, the adjusted 

position may deviate.



  The display may be difficult to view or temporarily affected by weather conditions such as 

rain, snow, light, and temperature.



  If the audio system is removed, the active driving display cannot be operated.

Mazda3_8FL6-EA-16F_Edition2.indb   21

2016/08/10   17:35:51