Personalization Features; Factory ; Available - Page 602

9–18

Specifications

Personalization Features

Item

Feature

Factory 

Setting

Available 

Settings

Settings 

Change 

Method

Active Driving Display

 (page 4-21)

Display

Setting can be changed so that the Active 

Driving Display is not displayed.

On

On/Off

C

—

The display height (up/down position) can be 

changed.

0

13 steps up/

down from 

initial setting 

(total: 27 steps)

C

—

The method for adjusting the display 

brightness (automatically/manually) can be 

changed.

AUTO

AUTO/MAN.

C

—

The standard brightness while automatic 

adjustment is selected can be changed using 

the brightness adjustment.

0

2 steps up/

down from 

initial setting 

(total: 5 steps)

C

—

The standard brightness while manual 

adjustment is selected can be changed using 

the brightness adjustment.

0

20 steps up/

down from 

initial setting 

(total: 41 steps)

C

—

Navigation 

guidance

The display information can be changed.

Lane 

Guidance 

& Turn by 

Turn

At Maneuver/

Lane Guidance 

& Turn by 

Turn/

Street Name & 

Turn by Turn/

OFF

C

—

*1  Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends 

that these systems remain On.

*2  Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The 

volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

*3  This system functions only when the navigation system is functioning.
*4  If the auto-wiper control is set to Off, the wiper lever 

 position is set to intermittent operation.

*5  If the setting is changed to Off, the following operation is performed according to the headlight switch position:



 At 

 position: Headlights turn off immediately after the ignition is switched off.



 At any position other than 

: Headlights on/off conditions vary according to the headlight switch 

position. Refer to Headlights on page 

4-43.

*6  When set to Off, the lights-on reminder is operable.

*7  The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when 

the auto headlight function is set to Off. Refer to Lights-On Reminder on page 

7-39.

*8  The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of 

the rear window defogger has been changed to Continuous.

*9  Available only in display from the center display.

Mazda3_8FL6-EA-16F_Edition2.indb   18

2016/08/10   17:39:57