Before Driving- Page 83

3–7

Before Driving

Keys

NOTE



  The system can be set to unlock all 

doors by performing a single operation.

  Refer to Personalization Features on 

page 9-12.

  Use the following procedure to change 

the setting.

1.  Switch the ignition off and close all 

of the doors and the liftgate/trunk 

lid.

2.  Open the driver's door.

3.  Within 30 seconds of opening the 

driver's door, press and hold the 

UNLOCK button on the key for 5 

seconds or longer (the sound of 

the doors locking/unlocking can be 

heard).

  After this, the system switches the 

setting each time the UNLOCK 

button is pressed (the sound of the 

doors locking/unlocking can be 

heard).

4.  The setting change is completed by 

doing any one of the following:



  Switching the ignition to ACC or 

ON.



  Closing the driver's door.



  Opening the liftgate/trunk lid.



  Not operating the key for 10 

seconds.



  Pressing any button except the 

UNLOCK button on the key.



  Pressing a request switch.



(Auto re-lock function)

  After unlocking with the key, all 

doors and the liftgate/trunk lid will 

automatically lock if any of the 

following operations are not performed 

within about 60 seconds. If your 

vehicle has a theft-deterrent system, 

the hazard warning lights will flash for 

confirmation.

  The time required for the doors to lock 

automatically can be changed.

  Refer to Personalization Features on 

page 9-12.



  A door or the liftgate/trunk lid is 

opened.



  The ignition is switched to any 

position other than off.



(With theft-deterrent system)

  When the doors are unlocked by 

pressing the unlock button on the key 

while the theft-deterrent system is 

turned off, the hazard warning lights 

will flash twice to indicate that the 

system is turned off.

Mazda3_8FL6-EA-16F_Edition2.indb   7

2016/08/10   17:35:17