When Driving- Page 147

2019 Mazda Mazda3 Sedan Owners Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

NOTE

Under the following conditions, the
KEY warning indication (red) is
displayed after the push button start
is pressed. This informs the driver
that the push button start will not
switch to ACC, even if it is pressed
from off (page 7-32).

The key battery is dead.

The key is out of operational
range.

The key is placed in areas where it
is difficult for the system to detect
the signal (page 3-7).

A key from another manufacturer
similar to the key is in the
operational range.

(Forced engine starting method)

If the KEY warning indication (red)
is displayed, or the push button start
indicator light (amber) flashes, this
could indicate that the engine may
not start using the usual starting
method (page 7-32
). Have your
vehicle inspected at an Authorized
Mazda Dealer as soon as possible. If
this occurs, the engine can be
force-started. Press and hold the
push button start until the engine
starts. Other procedures necessary
for starting the engine, such as
having the key in the cabin, and
depressing the clutch pedal (manual
transmission) or the brake pedal
(automatic transmission) are
required.

When the engine is force-started, the
KEY warning indication (red)
remains displayed and the push
button start indicator light (amber)
remains flashing.

(Automatic transmission)

When the selector lever is in the
neutral (N) position, the push button
start indicator light (green) does not
turn on.

7. Press the push button start after the

push button start indicator light (green)
turns on.

NOTE

After starting the engine, the push
button start indicator light (amber)
turns off and the ignition switches to
the ON position.

After pressing the push button start
and before the engine starts, the
operation sound of the fuel pump
motor from near the fuel tank can be
heard, however, this does not
indicate a malfunction.

8. After starting the engine, let it idle for

about 10 seconds.

NOTE

Whether the engine is cold or warm,
it should be started without the use
of the accelerator.

If the engine does not start the first
time, refer to Starting a Flooded
Engine under Emergency Starting. If
the engine still does not start, have
your vehicle inspected by an
Authorized Mazda Dealer (page
7-19).

When Driving

Start/Stop Engine

4-7

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58

Detailed Information for 2019 Mazda Mazda3 Sedan Owners Manual

Lists of information found in 2019 Mazda Mazda3 Sedan Owners Manual - Page 147

  • 7. Press the push button start after the push button start indicator light (green) turns on.
  • 8. After starting the engine, let it idle for about 10 seconds.