Blind Spot Monitoring (BSM); Blind Spot Monitoring; When Driving- Page 233



You may not be able to hear the LDWS
warning sound depending on the
surrounding conditions such as outside
noise.



If you set the LDWS to vibrate the
steering wheel, you may not feel the
vibrations depending on the road
surface conditions.

▼

Canceling the System

The LDWS can be set to inoperable.



(If only the LDWS is turned off)

Refer to the Settings section in the
Mazda Connect Owner's Manual.



(If the LDWS is turned off by
operating the i-ACTIVSENSE switch)

Refer to i-ACTIVSENSE Switch on
page 4-85.

NOTE

When the ignition is switched OFF, the
system status before it was turned off is
maintained. For example, if the ignition is
switched OFF with the LDWS operable,
the LDWS remains operational the next
time the ignition is switched ON.

Blind Spot Monitoring

(BSM)

*

▼

Blind Spot Monitoring (BSM)

The BSM is designed to assist the driver in
checking the area to the rear of the vehicle
on both sides during lane changes by
notifying the driver of the presence of
vehicles approaching from the rear in an
adjacent lane.

BSM operation

The BSM detects vehicles approaching
from the rear while traveling in the
forward direction at a speed of 10 km/h
(6.3 mph) or faster and notifies the driver
by turning on the BSM warning indicator
light and displaying the vehicle detection
screen.
If the turn signal lever is operated to signal
a turn in the direction in which the BSM
warning indicator light is illuminated
while the approaching vehicle is detected,
the BSM notifies the driver of possible
danger flashing on the BSM warning
indicator light, and by activating the
warning sound and the warning screen
indicator display.

When Driving

i-ACTIVSENSE

*Some models.

4-93

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58