CAUTION
When removing the lens or lamp unit using
a
fl
athead screwdriver, make sure that the
fl
athead screwdriver does not contact the
interior terminal. If the
fl
athead screwdriver
contacts the terminal, a short circuit may
occur.
NOTE
x
When replacing a bulb, contact an
Authorized Mazda Dealer if necessary.
x
Use the protective cover and carton for
the replacement bulb to dispose of the
old bulb promptly and out of the reach
of children.
x
For details regarding the installation
positions of the interior lights, refer to
the following:
x
Vanity mirror lights
Refer to Vanity Mirrors on page 5-34.
x
Overhead Lights/front map lights,
overhead light (rear), trunk light, and
luggage compartment light
Refer to Interior Lights on page 5-35.
▼
Replacing Exterior Light Bulbs
The exterior lights have either LEDs or
normal bulbs.
Only the bulb for a parking lights/front
side-marker lights (type B) can be
replaced.
LED type
x
Headlights
x
Daytime running lights
x
Parking lights (Type A)
x
Front turn signal lights
x
Front side-marker lights (Type A)
x
Side turn signal lights
*
x
High-mount brake light
x
Rear turn signal lights
x
Rear side-marker lights
x
Brake lights
x
Taillights
x
Reverse lights
x
License plate lights
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.
Bulb type
Parking lights/Front side-marker lights
(Type B)
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. If you are changing the left bulb, start
the engine, turn the steering wheel all
the way to the right, and turn off
engine. If you are changing the right
bulb, turn the steering wheel to the left.
3. Pull the center of each plastic retainer
and remove the retainers.
1. Removal
2. Installation
Maintenance and Care
Owner Maintenance
6-36
*Some models.
Mazda3_8HZ1-EA-19G_Edition1_old
2019-5-17 13:49:03