Authorized Mazda Dealer- Page 140

2006 Mazda MAZDA5 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Mazda3_8U55-EA-05G_Edition3.pdf
background image

Black plate (140,1)

NOTE

Each tire pressure sensor has a unique
ID signal code. The signal code must be
registered with the TPMS before it can
work. The easiest way to do it is to have
an Authorized Mazda Dealer change
your tire and complete ID signal code
registration.

When having tires changed at an
Authorized Mazda Dealer

Tire pressure sensor ID signal code
registration is completed when an
Authorized Mazda Dealer changes your
vehicle's tires.

When changing tires yourself

If you or someone else changes tires, you
or someone else can also undertake the
steps for the TPMS to complete the ID
signal code registration.

1. After tires have been changed, turn the

ignition switch to the ON position, then
turn it back to the ACC or LOCK
position.

2. Wait for about 15 minutes.

3. After about 15 minutes, drive the

vehicle at a speed of at least 25 km/h
(16 mph) for 10 minutes and the tire
pressure sensor ID signal code will be
registered automatically.

NOTE

If the vehicle is driven within about 15
minutes of changing tires, the tire
pressure monitoring system warning
light will flash because the sensor ID
signal code would not have been
registered. If this happens, park the
vehicle for about 15 minutes, after
which the sensor ID signal code will
register upon driving the vehicle for 10
minutes.

Replacing tires and wheels

CAUTION

l

When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.

l

The wheels equipped on your Mazda
are specially designed for installation
of the tire pressure sensors. Do not
use non-genuine wheels, otherwise it
may not be possible to install the tire
pressure sensors.

Be sure to have the tire pressure sensors
installed whenever tires or wheels are
replaced.
When having a tire or wheel or both
replaced, the following types of tire
pressure sensor installation are possible.

l

The tire pressure sensor is removed
from the old wheel and installed to the
new one.

l

The same tire pressure sensor is used
with the same wheel. Only the tire is
replaced.

5-26

Driving Your Mazda

Starting and Driving

Mazda3_8U55-EA-05G_Edition3 Page140
Tuesday, September 13 2005 10:41 AM

Form No.8U55-EA-05G

Detailed Information for 2006 Mazda MAZDA5 Owners Manual

Lists of information found in 2006 Mazda MAZDA5 Owners Manual - Page 140

  • 1. After tires have been changed, turn the ignition switch to the ON position, then turn it back to the ACC or LOCK position.
  • 2. Wait for about 15 minutes.
  • 3. After about 15 minutes, drive the vehicle at a speed of at least 25 km/h (16 mph) for 10 minutes and the tire pressure sensor ID signal code will be registered automatically.