Accessory ; Satin Finish Fuel ; Lumbar Adjustment- Page 3

2011 Mazda Mazda6 Smart Start Guide

Model Year
2014 Dodge Charger SRT Owner Manual
background image

3

4

Fuel door Release 

(located on floor next to driver’s seat)

To open, pull the remote fuel  
door release. 

NOTE:

 Fuel requirement 87 Octane.

Fuel door

To avoid scratching the paint  
during refueling, secure the fuel  
filler cap tether over the hook  
as shown.

ALUMINUM WhEEL CARE

Your aluminum wheels have a 
protective coating on them. Only 
use a mild soap or neutral detergent 
with a sponge or soft cloth to clean 
them. Using a wire brush, polishing 
compound, solvent, or any type of 
abrasive cleaner may damage the 
protective coating.

genuine Mazda Accessory 
Wheel Locks are available at 
your Mazda dealer.

genuine Mazda 
Accessory 
Chrome or Pearl 
Satin Finish Fuel 
Filler doors are 
available at your 
Mazda dealer.

Seats

ELECTRONICALLY OPERATEd dRIVER SEAT CONTROLS 

Slide/Tilt Switch

 

Seat can be moved back and forth, raised, 
lowered, or tilted with this control.

Lumbar Adjustment

Rotate clockwise to 
increase support and 
counterclockwise to 
decrease support.

Recline Switch

 

Push forward or backward 
to adjust seatback angle.

Memory Seat Switch

To Program the driver’s Seat Position

    

1

  Park vehicle.

    

2

   Adjust seat to desired position using the slide/tilt and recline switches.

    

3

   While pushing the memory seat SET button, push one of the three 

programming buttons until a beep is heard. Programming is now 
complete. Program the remaining two buttons as desired.

  

NOTE:

 You can also program one seat position for each advanced key/retractable 

type key used with the vehicle. See Owner’s Manual for programming instructions.

To Move the Seat to a Programmed Position

 

  

•   

With driver’s door OPEN and ignition OFF

, push and release one 

of the programmed buttons (1, 2, or 3) when entering the vehicle.

 

OR

 

  

•   

With driver’s door CLOSEd and ignition ON

, push and hold one of 

the programmed buttons (1, 2, or 3).

NOTE:

 Memory seat functions DO NOT operate when driver’s door is OPEN and 

ignition is ON, when driver’s door is CLOSED and ignition is OFF, or when the vehicle 
is in motion.

www.MazdaUSA.com

283157_11b_Mazda6_SSG_102510.indd   4-5

10/25/10   5:04 PM

Detailed Information for 2011 Mazda Mazda6 Smart Start Guide

Lists of information found in 2011 Mazda Mazda6 Smart Start Guide - Page 3

  • With driver’s door OPEN and ignition OFF , push and release one of the programmed buttons (1, 2, or 3) when entering the vehicle.
  • With driver’s door CLOSEd and ignition ON , push and hold one of the programmed buttons (1, 2, or 3).

Related Documents for 2011 Mazda Mazda6 Smart Start Guide