Owner Maintenance; Rear turn signal lights; Rear side-marker lights- Page 432

7. Disconnect the bulb from the socket.

Rear turn signal lights

Rear side-marker lights

8. Install the new bulb in the reverse

order of the removal procedure.

Taillights (Trunk lid side) (With LED
headlights)

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Taillights (Trunk lid side) (With halogen
headlights), Reverse lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Pull the center of each plastic retainer

and remove the retainers and the trunk
lid trim.

Removal

Installation

3.

(Reverse lights)

Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.

4. Turn the socket and bulb assembly

counterclockwise and remove it.

Maintenance and Care

Owner Maintenance

6-50

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49