Your Vehicle; Detection Areas; Do not rely completely on the BSM system and be sure to look over - Page 26

25

Blind Spot Monitoring System

NOTE: 

Do not rely completely on the BSM system and be sure to look over 

your shoulder before changing lanes: 

•   The BSM system can assist the driver in confirming the safety of the surroundings, 

but is not a complete substitute. 

•  The driver is responsible for ensuring safe lane changes and other maneuvers. 
•   Always pay attention to the direction in which the vehicle is traveling and the 

vehicle’s surroundings. 

•   The BSM system does not operate when the vehicle speed is lower than 

about 6.2 mph.

Turning BSM System Off

Turning the BSM system off will turn off both the light and sound 

indicators. To manually turn the BSM system off, push the BSM 

OFF switch on the dash. The BSM OFF indicator will illuminate 

in the instrument cluster when the BSM system is off. The BSM 

system will retain the last setting before the ignition was turned off.

BLIND SPOT MONITORING (BSM) SYSTEM (if equipped)

The Blind Spot Monitoring (BSM) system is designed to assist the driver  
by monitoring the blind spots to the rear of the vehicle on both sides.

• 

 If your vehicle speed is about 6.2 mph or more, the BSM will 
warn you of vehicles in the detection area by illuminating the 
BSM warning lights located on the left and right door mirrors.

• 

 If you operate a turn signal in the direction of an illuminated BSM warning 
light, the system will also warn you with a beep and warning light flash.

• 

 BSM sensors are located under the left and right rear bumper areas.  
The BSM system may not operate properly if the rear bumper gets too  
dirty, so keep the rear bumper area clean. 

Refer to your Owner’s Manual for complete details.

Your Vehicle

Detection Areas

Image  

is for 

reference.