Essential Safety Equipment; To move the driving position to a; Erasing programmed driving positions- Page 26

To move the driving position to a
programmed position

(Using a button on the side of the seat)

1. Make sure the parking brake is on.
2.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

3. Start the engine.
4. Press the programming button for the

driving position you want to call up
(button 1 or 2).

5. A beep sound is heard when the

driving position adjustment is
completed.

NOTE

•

If the driving position movement is not
changed, only the beep sounds.

•

A seat position can be called up even
with the engine not running.

•

The driving position adjustment is
canceled in the following cases:

•

Any of the seat adjustment switches is
operated.

•

The SET button is pressed.

•

Programming button 1 or 2 is pressed.

•

The key   button or   button is
operated.

•

The vehicle starts moving.

•

The active driving display is adjusted.

(Using a programmed key)

1. Unlock the doors by pressing a request

switch or the key   button.

2. After unlocking the doors, the seat

position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.

3. Make sure the parking brake is on.
4.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

5. Start the engine.
6. The active driving display adjustment

begins.

NOTE

•

If there is no driving position movement,
a beep is not heard.

•

The driving position adjustment is
canceled in the following cases:

•

Any of the seat adjustment switches is
operated.

•

The SET button is pressed.

•

Programming button 1 or 2 is pressed.

•

The key   button or   button is
operated.

•

The vehicle starts moving.

•

The active driving display is adjusted.

Erasing programmed driving positions

(Erasing the driving positions
programmed to the key)

1. Switch the ignition OFF.
2. Press the SET button on the side of the

seat until a beep sound is heard one
time.

3. After the beep sounds, press the key 

button within 5 seconds until a beep
sound is heard one time.

NOTE

If a beep sound is heard three times, the
operation is canceled.

Essential Safety Equipment

Seats

2-12

Mazda6_8GU3-EA-18A_Edition3

2018-7-17 14:19:54