Close Proximity Warning; When Driving; Instrument cluster (Type B)- Page 274

Instrument cluster (Type B)

Multi-information Display

MRCC Distance 
between vehicle 
display

MRCC Set vehicle speed

Vehicle ahead display

Vehicle ahead display

MRCC Distance 
between vehicle 
display

MRCC Set 
vehicle speed

Active driving display

If there is a problem with the MRCC with Stop & Go function system, a message is
displayed on the multi-information display. Check the center display to verify the problem
and then have your vehicle inspected by an Authorized Mazda Dealer.
Refer to Message Indicated on Display on page 7-38.

▼

Close Proximity Warning

If your vehicle rapidly closes in on the vehicle ahead because the vehicle ahead applies the
brakes suddenly while you are traveling in headway control, the warning sound activates
and the brake warning is indicated in the display. Always verify the safety of the
surrounding area and depress the brake pedal while keeping a safer distance from the
vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.

NOTE

In the following cases, the warnings and brakes may not operate even if your vehicle starts
closing in on the vehicle ahead.

•

You are driving your vehicle at the same speed as the vehicle ahead.

•

Directly after the MRCC with Stop & Go function system has been set.

•

Directly after the accelerator pedal is released.

•

Another vehicle cuts into the driving lane.

When Driving

i-ACTIVSENSE

4-144

Mazda6_8GU3-EA-18A_Edition3

2018-7-17 14:19:54