▼
Setting the System
The MRCC with Stop & Go function system operates when all of the following conditions
are met.
•
Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)
•
The MRCC with Stop & Go function is turned on.
•
The brake pedal is not depressed.
•
The parking brake is released (electric parking brake (EPB) indicator light is turned off).
•
There is no problem with the DSC.
•
All the doors are closed.
•
The driver's seat belt is fastened.
•
The selector lever is in the drive (D) position or manual (M) position (manual mode).
NOTE
•
In the following cases, the MRCC with Stop & Go function system is canceled when the
vehicle is traveling at 30 km/h (19 mph) or less and “Mazda Radar Cruise Control
disabled under 30 km/h” is displayed in the multi-information display.
•
The Forward Sensing Camera (FSC) cannot detect target objects (There is problem
with the Forward Sensing Camera (FSC) or windshield is dirty).
•
There is a problem with the stop hold control function.
•
There is a problem with the electric parking brake (EPB).
•
It may not be possible to set the MRCC with Stop & Go function system directly after
starting the engine, while the DSC operation is being checked.
Turning on the system
CANCEL switch
RES switch
OFF switch
switch
switch
MODE switch
SET- switch
SET+ switch
When Driving
i-ACTIVSENSE
4-145
Mazda6_8GU3-EA-18A_Edition3
2018-7-17 14:19:54