When Driving; Canceling the system; Turning off the system- Page 279

NOTE

•

The setting speed can be changed by
operating the SET  switch or SET
switch during stop hold control.

•

When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. For the set vehicle speed, check
the set vehicle speed indication in the
display.

•

When depressing the accelerator pedal,
the inter-vehicle distance indication in
the display changes to the white-line
indication.

Canceling the system

When the following operations are
performed, the MRCC with Stop & Go
function system is canceled, and the
MRCC with Stop & Go function set
indication (green) switches to the MRCC
with Stop & Go function main indication
(white) at the same time.

•

The OFF/CANCEL switch is pressed.

•

The brake pedal is depressed.

•

The parking brake is applied.

•

The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.

•

Any of the doors is opened.

•

The driver's seat belt is unfastened.

Under the following conditions, the
MRCC with Stop & Go function cancel
indication is displayed in the
multi-information display and a single
beep sound is heard.

•

The DSC has operated.

•

The Smart Brake Support (SBS) has
operated.

•

The Smart City Brake Support (SCBS)
or Advanced Smart City Brake Support
(Advanced SCBS) has operated.

•

When traveling on a downslope for a
long period of time.

•

There is a problem with the system.

•

The engine has stalled.

•

The parking brake is automatically
applied during stop hold control.

•

The radar sensor (front) cannot detect
target objects (during rain, fog, snow or
other inclement weather conditions, or
when the radiator grille is dirty).

Resuming control

If the MRCC with Stop & Go function
system is canceled, you can resume
control at the previously set speed by
pressing the RES switch and after all of
the operation conditions have been met.

NOTE

If the set speed is not indicated in the
display, the control does not resume even
if the RES switch is pressed.

Turning off the system

Press the OFF/CANCEL switch two times
while the MRCC with Stop & Go function
system is operating to switch off the
system.

When Driving

i-ACTIVSENSE

4-149

Mazda6_8GU3-EA-18A_Edition3

2018-7-17 14:19:54