NOTE
The LAS & LDWS indication is gray when
the system detects only a white (yellow)
line on either the left or right, and the
indication changes to white when the
system detects white (yellow) lines on both
the left and right sides.
Detection only on
either left or right
Detects on both
left and right sides
(Gray)
(White)
The LAS & LDWS goes on stand-by
status in the following cases:
•
The system cannot detect white (yellow)
lane lines.
•
The vehicle speed is less than about 60
km/h (37 mph).
•
The ABS/TCS/DSC is operating.
•
The DSC is turned off.
(If the DSC is turned off while the
system is operational, a warning beep is
heard and the system goes on standby.)
•
The vehicle is making a sharp curve.
•
The brake pedal is depressed.
•
The steering wheel is operated abruptly.
•
The width of a lane is excessively
narrow or wide.
NOTE
•
The LAS & LDWS does not operate until
the system detects white (yellow) lane
lines on either the left or right.
•
When the system detects a white
(yellow) lane line on one side only, the
system will not operate the steering
wheel operation assist and the warning
for the lane line on the side that is not
being detected. The steering wheel
operation assist and the warning is only
for a lane deviation on the side that is
being detected.
•
If the driver takes his or her hands off
the steering wheel (not holding the
steering wheel), the warning sound is
activated and an alert is indicated in the
multi-information display or the active
driving display.
Active Driving Display
Multi-information Display
If the steering wheel is held lightly, or
depending on the road conditions, the
system may detect that you have
released the steering wheel (not holding
the steering wheel) even if you are
holding it, and display a message in the
multi-information display or the active
driving display.
•
The timing at which the lane departure
warning is activated and the steering
wheel operation assist is performed
varies.
When Driving
i-ACTIVSENSE
4-158
Mazda6_8GU3-EA-18A_Edition3
2018-7-17 14:19:54