Multi-information Display; Active Driving Display; When Driving- Page 289

•

The following settings for the LAS &
LDWS can be changed. Refer to Safety
Equipment on page 9-11.

•

Steering operation assist operational/
non-operational

•

Cancel sensitivity (likelihood of
steering assist)

Vehicle lane line display

When the LAS & LDWS becomes
operational while on standby, the vehicle
lane lines are displayed in the
multi-information display and the active
driving display. In the vehicle lane lines
display indicating the operation status, the
color of the vehicle lane lines being
detected changes to white.

(Stand-by status)

Multi-information Display

Active Driving Display

(Operational status)

Multi-information Display

Active Driving Display

Auto cancel

In the following cases, the LAS & LDWS
is automatically canceled, the LAS &
LDWS warning indication (amber) turns
on, and an alert is displayed. When the
LAS & LDWS become operational, the
system turns back on automatically.

•

The temperature inside the camera is
high or low.

•

The windshield around the camera is
foggy.

•

The windshield around the camera is
blocked by an obstruction, causing poor
forward visibility.

Auto cancel of warning/steering assist

When the following operations are
performed, the LAS & LDWS operation is
canceled automatically. The LAS &
LDWS resumes automatically after the
operation.

•

The steering wheel is operated abruptly.

•

The brake pedal is operated.

•

The accelerator pedal is operated.
(To cancel the automatic sensitivity
cancel function, deselect “Cancel
sensitivity” in the personalization
features setting.)

•

The turn signal lever is operated.

•

The vehicle crosses a lane line.

NOTE

•

After the operation, the LAS & LDWS
operation may not operate for a period
of 5 seconds at the most until the lane
lines are detected.

•

Under the following conditions, the LAS
& LDWS cancels the warning/steering
assist automatically.

When Driving

i-ACTIVSENSE

4-159

Mazda6_8GU3-EA-18A_Edition3

2018-7-17 14:19:54