To Set Speed; When Driving; Cruise Control- Page 345

Deactivation

To deactivate the system, press the OFF/
CANCEL switch.
The cruise main indication (white) turns
off.

▼

To Set Speed

1. Activate the cruise control system by

pressing the ON switch. The cruise
main indication (white) turns on.

2. Accelerate to the desired speed, which

must be more than 25 km/h (16 mph).

3. Set the cruise control by pressing the

SET/  switch at the desired speed. The
cruise control is set at the moment the
SET/  switch is pressed. Release the
accelerator pedal simultaneously. The
cruise set indication (green) turns on.

NOTE

•

The cruise control speed setting cannot
be performed under the following
conditions:

•

(Automatic transaxle)

The selector lever is in the P or N
position.

•

(Manual transaxle)

The shift lever is in the neutral
position.

•

The parking brake is applied.

•

Release the SET/  or RESUME/
switch at the desired speed, otherwise
the speed will continue increasing while
the RESUME/  switch is pressed and
held, and continue decreasing while the
SET/  switch is pressed and held
(except when the accelerator pedal is
depressed).

•

On a steep grade, the vehicle may
momentarily slow down while ascending
or speed up while descending.

•

The cruise control will cancel if the
vehicle speed decreases below 21 km/h
(13 mph) when the cruise control is
activated, such as when climbing a steep
grade.

When Driving

Cruise Control

4-215

Mazda6_8GU3-EA-18A_Edition3

2018-7-17 14:19:54