Child-Restraint System Suitability for Various Seat Positions Table; Positions Table; Essential Safety Equipment- Page 50

Child-Restraint System Suitability for Various Seat

Positions Table

(Mexico)

Provided information in the table shows your child-restraint system suitability for various
seating position. For installation suitability of other manufacturer child-restraint system,
carefully consult the manufacturer's instructions which accompany the child-restraint
system.
When installing a child-restraint system, the following points must be observed:

•

Always remove the head restraint before installing a child-restraint system. However,
when installing a backless booster seat, always install the vehicle head restraint to the seat
where the backless booster seat is installed. In addition, always use a tether strap and
attach it securely. Refer to Head Restraints on page 2-16.

•

When installing a child-restraint system to the front passenger seat, adjust the seat slide
position as far back as possible. Adjust the seat bottom to the highest position so that the
seat belt can securely fasten the child-restraint system.
Refer to Adjusting the Front Passenger's Seat on page 2-13.

•

When it is difficult to install a child-restraint system to the front passenger seat, or the seat
belt cannot be secured to the child-restraint system, perform the following operations to
adjust the seat holding the child-restraint system so that the seat belt can be secured
completely to it.

•

Move the seat forward.

•

Move the seatback forward or back.

•

When installing a child-restraint system to the rear seat, adjust the front seat position so
that the front seat does not contact the child-restraint system.
Refer to Adjusting the Driver's Seat on page 2-5.
Refer to Adjusting the Front Passenger's Seat on page 2-13.

•

When installing a child-restraint system came equipped with a tether, remove the head
restraint.
Refer to Head Restraints on page 2-16.

•

An i-Size child-restraint system refers to a child-restraint system which has acquired
i-Size category certification for the UN-R 129 regulation.

When installing a child-restraint system to the rear seat, refer to the child-restraint system
manufacturer's instructions and the Using ISOFIX Lower Anchor on page 2-46.

Seating position

Passenger

Rear (Left)

Rear (Center)

Rear (Right)

Seating position suit-
able for universal
belted (Yes/No)

No

Yes (U)

Yes (U)

*1

Yes (U)

Essential Safety Equipment

Child Restraint

2-36

Mazda6_8GU3-EA-18A_Edition3

2018-7-17 14:19:54