When Driving; Vehicle lane line display- Page 309

NOTE



The LAS & LDWS remains on stand-by
until it detects white (yellow) lines on
both the left and right sides, or on either
side.



When the system detects a white
(yellow) lane line on one side only, the
system will not activate warnings for the
lane line on the side that is not being
detected.



The distance and warning sensitivity
(likelihood of a warning) which the
system uses to determine the possibility
of a lane departure can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

Vehicle lane line display

When the LAS & LDWS becomes
operational while on standby, the vehicle
lane lines are displayed in the
multi-information display and the active
driving display. The system changes to
operational status display when the system
detects a white (yellow) line on either the
left or right.

(Stand-by status)

(Operational status)

Auto cancel

In the following cases, the LAS & LDWS
is automatically canceled, the LAS &
LDWS warning indication (amber) turns
on, and an alert is displayed. When the
LAS & LDWS become operational, the
system turns back on automatically.



The temperature inside the camera is
high or low.



The windshield around the camera is
foggy.



The windshield around the camera is
blocked by an obstruction, causing poor
forward visibility.

When Driving

i-ACTIVSENSE

4-171

Mazda6_8JN3-EA-20H_Edition1_old

2020-6-18 17:31:27