Always check the Owner’s Manual for more operating information and safety features ; Turn signal/lighting ; Tip: Headlights turn off and- Page 5

2

1

AUTO

G E T T I N G   S T A R T E D

Always check the Owner’s Manual for more operating information and safety features 

Turn signal/lighting 
control lever

OFF

= Lights off
= Tail, parking and 

dashboard lights on: Rotate 
knob (

1

) to first notch

= Tail, parking, dashboard

and headlights on: Rotate 
knob (

1

) to second notch

AUTO*

= With ignition switch 

in ON position; headlights and 
exterior lights automatically turn
ON/OFF depending on surrounding
darkness/lightness; rotate knob 
(

1

) to third notch

High beams on/off: Push 
forward/pull back to detent.
To flash high beams: Pull back
slightly and release.

= Fog lights* on: Rotate (

2

);

functions only with headlight 
low beams on
Turn signals right/left: Move 
lever up/down.

Tip: Headlights turn off and
parking lights remain on if
headlight switch is left on 
and ignition switch is in lock
position or key is removed.

REAR

1

REAR

1

3

INT

REAR

1

2

INT

Wiper/washer control lever

Single wipe: Push lever up.
Washer: Pull back, also 
operates wipers. 
Intermittent wiper: One click down.
To change interval speed:
Rotate inner ring* (

2

).

Normal wiper speed: Two clicks down.
High-speed wiper: Three clicks down.
Auto*: One click down.
Rain sensor senses rain amount 
on windshield, then controls 
wiper automatically.
Rain sensor sensitivity is adjusted
from high sensitivity (+) to less 
sensitivity (-) by rotating ring (

3

).

Getting
Started

Getting
Started

Rear window wiper/
washer (5-Door only)

To activate rear interval wiper:
Rotate knob (

1

) up to INT.

To activate rear normal speed
wiper: Rotate knob (

1

) up to ON.

To activate rear washer: Rotate
knob (

1

) to

and release.

*Denotes optional equipment