Fuses- Page 522

2013 Mazda MAZDASPEED3 Mazda3 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

6. Interior Comfort
9. Customer Information
background image

Black plate (522,1)

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of the removal procedure.

Luggage compartment light (5 Door)

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of the removal procedure.

Fuses

Your vehicle's electrical system is
protected by fuses.

If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.

If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.

q

Fuse Replacement

Replacing the fuses on the vehicle's left
side

If the electrical system does not work,
first inspect the fuses on the vehicle's left
side.

1. Make sure the ignition is switched off,

and other switches are off.

2. Remove the cover.

8-58

Maintenance and Care

Owner Maintenance

Mazda3_8CV6-EA-12H_Edition3 Page522
Thursday, February 28 2013 11:31 AM

Form No.8CV6-EA-12H

Detailed Information for 2013 Mazda MAZDASPEED3 Mazda3 Owners Manual

Lists of information found in 2013 Mazda MAZDASPEED3 Mazda3 Owners Manual - Page 522

  • 2. Disconnect the bulb by pulling it out.
  • 3. Install the new bulb in the reverse order of the removal procedure.
  • 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.
  • 2. Disconnect the bulb by pulling it out.
  • 3. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off, and other switches are off.
  • 2. Remove the cover.