TURN THE AUXILIARY KEY IN- Page 93

2013 Mazda MAZDASPEED3 Mazda3 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

6. Interior Comfort
9. Customer Information
background image

Black plate (93,1)

NOTE

l

After starting the engine, the push button
start indicator lights (ACC and ON) turn
off and the ignition is in the ON position.

l

After pressing the push button start and
before the engine starts, the operation
sound of the fuel pump motor from near the
fuel tank can be heard, however, this does
not indicate a malfunction.

8. After starting the engine, let it idle for

about ten seconds.

NOTE

l

Whether the engine is cold or warm, it
should be started without the use of the
accelerator.

l

If the engine does not start the first time,
refer to Starting a Flooded Engine under
Emergency Starting. If the engine still does
not start, have your vehicle inspected by an
Authorized Mazda Dealer (page 7-18).

Starting the engine using the auxiliary
key

If the engine cannot be started for reasons
such as the advanced key battery is dead,
the engine can be started using the
auxiliary key.

1. Slide the auxiliary key out from the

bottom of the advanced key.

2. Use the auxiliary key to remove the

key slot cover.

3. Depress the clutch pedal (manual

transaxle) or the brake pedal (automatic
transaxle) until the ring around the key
slot starts flashing.

4. Insert the auxiliary key into the slot

while it is flashing, but DO NOT
TURN THE AUXILIARY KEY IN
THE SLOT.

CAUTION

After inserting the auxiliary key, do
not attempt to turn it in the key slot.
It could damage the vehicle or the
auxiliary key.

5. Press the push button start to start the

engine.

NOTE

l

Leave the auxiliary key in the key slot while
the engine is running.

l

When leaving the vehicle, remove the
auxiliary key from the key slot and the
vehicle.

l

To switch the ignition position, insert the
auxiliary key into the key slot and press the
push button start without the clutch pedal
(manual transaxle) or the brake pedal
(automatic transaxle) depressed.

Turning the engine off

1. Stop the vehicle completely.

2.

(Manual transaxle)

Shift into neutral.

(Automatic transaxle)

Shift the shift lever to the P position.

Knowing Your Mazda

Advanced Keyless Entry and Start System

3-15

Mazda3_8CV6-EA-12H_Edition3 Page93
Thursday, February 28 2013 11:27 AM

Form No.8CV6-EA-12H

Detailed Information for 2013 Mazda MAZDASPEED3 Mazda3 Owners Manual

Lists of information found in 2013 Mazda MAZDASPEED3 Mazda3 Owners Manual - Page 93

  • 8. After starting the engine, let it idle for about ten seconds.
  • 1. Slide the auxiliary key out from the bottom of the advanced key.
  • 2. Use the auxiliary key to remove the key slot cover.
  • 3. Depress the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) until the ring around the key slot starts flashing.
  • 4. Insert the auxiliary key into the slot while it is flashing, but DO NOT TURN THE AUXILIARY KEY IN THE SLOT.
  • 5. Press the push button start to start the engine.
  • 1. Stop the vehicle completely.
  • 2. (Manual transaxle) Shift into neutral.