Interior Comfort; Climate Control System; Standard Use- Page 120

6-8

Interior Comfort

Climate Control System

Form No. 8Q47-EA-01F

▼

Standard Use

1. Press the AUTO switch. Selection of 

the airflow mode, air intake selector 
and amount of airflow will be 
automatically controlled.

2. Use the temperature control dial to 

select a desired temperature.

To turn off the system, press the OFF 
switch.

▼

Windshield Defrosting and 
Defogging

Press the windshield defroster switch.
In this position, the outside air position is 
automatically selected, and the air 
conditioner automatically turned on. The 
air conditioner will direct dehumidified 
air to the front windshield and side 
windows (page 6-4). Airflow amount will 
be increased.
To turn off the system press the 
windshield defroster switch again.

NOTE

•

First set the temperature to 25.0°C 
(77.0°F), then adjust to the desired 
temperature.

•

Setting the temperature to 
maximum high or low will not 
provide the desired temperature at a 
faster rate.

•

To prevent cool air blowing from 
the vents when heating right after 
starting the engine, the amount of 
airflow is reduced until the air 
warms up.

AUTO

AUTO

Cold

Hot

Foggy Windshield:
Using the 

 position with the 

temperature control set to the cold 
position will cause the outside of the 
glass to fog up. Your vision will be 
hampered, which could lead to a 
serious accident. Set the temperature 
control to hot or warm position when 
using the 

 position.

WARNING

J76Y.book  Page 8  Wednesday, March 27, 2002  5:04 PM