Authorized Mazda Dealer.- Page 309

2013 Mazda MX-5 Miata PRHT Mx 5 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information and Reporting Safety Defects
background image

Black plate (309,1)

14. Install the compressor hose to the tire

valve.

Valve

Compressor hose

15. Insert the compressor plug into the

interior accessory socket and switch
the ignition to ACC (page 6-84).

Compressor plug

Center console

Compressor

CAUTION

Ø

Before pulling out the compressor
plug from the electrical socket,
make sure the compressor power
switch is off.

Ø

The compressor turns on and off
with the push-button switch.

16. Turn the compressor switch on and

inflate the tire carefully to the correct
inflation pressure.

WARNING

Never operate the compressor above
300 kPa (3.1 kgf/cm

2

, 3 bar, 43.5 psi):

Operating the compressor above 300
kPa (3.1 kgf/cm

2

, 3 bar, 43.5 psi) is

dangerous. When the inflation
pressure rises above 300 kPa (3.1
kgf/cm

2

, 3 bar, 43.5 psi), heated air

will be exhausted from the back of
the compressor and you could be
burned.

CAUTION

If the compressor operates slowly or
becomes hot, it indicates
overheating. Turn the compressor off
immediately and leave it turned off
for 30 minutes or longer.

NOTE

l

Check the tire inflation pressure label
(driver's door frame) for the correct tire
inflation pressure.

l

Do not use the compressor for longer than
10 minutes because using the compressor
for long periods could damage it.

l

If the tire does not inflate, repair of the tire
may not be possible. If the tire does not
reach the correct inflation pressure within a
10-minute period, it probably has received
more extensive damage. When this happens,
the emergency flat tire repair kit cannot be
used to repair the tire. Contact an
Authorized Mazda Dealer.

l

If the tire has been over-inflated, loosen the
screw cap on the compressor and bleed
some of the air out.

17. When the tire has been inflated to the

proper inflation pressure, turn the
compressor switch off and remove the
compressor hose from the tire valve.

In Case of an Emergency

Flat Tire

7-11

MX-5_8CM3-EA-12F_Edition2 Page309
Friday, August 31 2012 1:46 PM

Form No.8CM3-EA-12F

Detailed Information for 2013 Mazda MX-5 Miata PRHT Mx 5 Owners Manual

Lists of information found in 2013 Mazda MX-5 Miata PRHT Mx 5 Owners Manual - Page 309

  • 14. Install the compressor hose to the tire valve.
  • 15. Insert the compressor plug into the interior accessory socket and switch the ignition to ACC (page 6-84).
  • 16. Turn the compressor switch on and inflate the tire carefully to the correct inflation pressure.
  • 3.1 kgf/cm 2 , 3 bar, 43.
  • 3.1 kgf/cm 2 , 3 bar, 43.
  • 3.1 kgf/cm 2 , 3 bar, 43.
  • 17. When the tire has been inflated to the proper inflation pressure, turn the compressor switch off and remove the compressor hose from the tire valve.

Related Documents for 2013 Mazda MX-5 Miata PRHT Mx 5 Owners Manual