If Trouble Arises; Flat Tire; Do not adhere the speed restriction- Page 423



If the tire inflation pressure does not
increase, repair of the tire is not
possible. If the tire does not reach
the specified tire inflation pressure
within 10 minutes, it may have
received extensive damage. In this
case, the repair using the emergency
flat tire repair kit was not successful.
Contact an Authorized Mazda
Dealer.

13. Adhere the speed restriction sticker to

an area where it can be viewed easily
by the driver.

14. Adhere the repaired tire sticker to the

wheel of the flat tire.

WARNING

Do not adhere the speed restriction
sticker to the padded area on the
steering wheel:

Adhering the speed restriction sticker to
the padded area on the steering wheel
is dangerous because the air bag may
not operate (deploy) normally resulting
in serious injury. In addition, do not
adhere the sticker to areas where
warning lights or the speedometer
cannot be viewed.

15. When the tire inflates to the specified

tire inflation pressure, turn the air
compressor switch off, turn the sleeve
of the injection hose to the left, and
pull it out of the tire valve.

16. Remove the air compressor hose from

the injection valve of the bottle. After
that, install the injection hose to the
injection valve of the bottle to prevent
leakage of any remaining sealant.

If Trouble Arises

Flat Tire

7-9

MX-5_8GV5-EA-18E_Edition3

2018-7-17 15:48:16