Attaching safety seats with LATCH (Lower Anchors and Tethers for; Children) attachments for child seat anchors; you must not attach two LATCH seats to- Page 128

2002 Mazda Tribute Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

Attaching safety seats with LATCH (Lower Anchors and Tethers for
Children) attachments for child seat anchors

Some child safety seats have two rigid or webbing mounted attachments
that connect to two anchors at certain seating positions in your vehicle.
When properly installed, this type of seat eliminates the need to use seat
belts to attach the child seat. For forward-facing child seats, the tether
strap must also be attached to the proper tether anchor. See

Attaching

safety seats with tether straps

in this chapter.

Your vehicle has LATCH anchors for child seat installation as shown in
the illustration. There are none in the front passenger seat.

The anchors closest to the center

rear seat are provided primarily for

child seats at the outboard seating

positions. These anchors are farther

apart than the pairs of lower

anchors for child seat installation at

the outboard seats.
While the anchors closest to the
center seat may also be usable, special precautions must be followed.
First, if those anchors are already in use by a LATCH equipped child seat
on either outboard seat,

you must not attach two LATCH seats to

the same anchor point

— it will overload the anchor point. Either

spread the two LATCH equipped seats to the outboard positions or use
the regular lap belt on the center one (If the seat has a tether, be sure to
also attach it to the center tether anchor).
Secondly, those LATCH equipped child seats

with rigid LATCH

attachments

will not latch in the center rear position because those two

middle anchors are too far apart. You can only attach the rigid LATCH

equipped child seats to the outboard seat LATCH anchors that have the

proper spacing for that type of child seat. If your child seat has flexible

LATCH attachments, be sure that the manufacturer’s instructions say

that it can reach to anchors spaced at least 500 mm (19 in) apart.

WARNING: Never attach two LATCH child safety seats to the

same anchor. In a crash, one anchor may not be strong enough

to hold two child safety seat attachments and may break,

causing serious injury or death.

Seating and Safety Restraints

128